Boarding Up Your Windows Before a Storm
Boarding up windows reduces the damage to property caused by natural disasters as well as vandalism. It also helps to protect the residents of the home from shattered glass.
Use a tape measure the width and height at the edges of the window frame. Note down all measurements. Opt for corrosion-resistant screws that penetrate deep into the framing.
Pre-storm preparation
If you reside in a region that is prone to hurricanes, board your windows to safeguard yourself from damage. It is crucial to secure your home before a storm begins. This gives you time to prepare and gather the supplies you need. You can secure your home as soon as the issue of a watch.
Begin by getting the window frame ready. Take away all debris from the area that could be blown around by a storm and cause damage to your home. It is also important to remove any objects in your yard that can be easily destroyed by strong winds, like bikes, lawn furniture and propane tanks.
Then, measure the width and height of each window opening to determine the amount of plywood needed. Mark the height and width by aligning the inside edges of your window frame with the trim on the outside. If the window is inoperable bay or a double-hung windows with full sill Add eight inches to both the height and the width to create a four-inch overlap on each side.
Purchase plywood that is 5/8-inch thick or more and is free from knots. This kind of plywood is cheap and readily available. It also provides 30% more impact strength than OSB. (OSB). It should be of exterior grade and ideally, CDX, which means it is waterproof.
Install stainless-steel hanger screws into the window framing at 16-inch intervals, then drill matching holes into the plywood panels. boarding up property will let you quickly put the plywood in place if the weather is forecast to get stormy. It also helps reduce time. You can also label each panel, and mark it with a arrow to easily identify the door or window that it will cover.
After the plywood is placed on each window and then hung, you can use duct tape to keep it in the position. It is a good idea to apply an adhesive tape that is strong instead of regular duct tape, since it will last longer and will prevent moisture intrusion.
Post-storm recovery
Boarding up windows is a great way to protect your home until repairs are finished, whether it was a natural catastrophe that hit your home or vandalism. It also helps prevent further damage and deters criminal activity. The boarding process is quick efficient, efficient, and cost-effective and is a great option for homeowners who are who are facing a storm that is severe.
Find out the height and width of each window before you begin to board them up. This will allow you to determine the proper size of plywood sheets. You should also remove the windows from the old ones and clean up any broken glass.
To board up windows, it is recommended to use 5/8 inch thick plywood. This kind of plywood has greater impact strength than the oriented string board (OSB). Ideally, you should also purchase boards that are exterior grade. They are generally more expensive, but they will provide better protection against weather damage.
After you've gathered all of the items now is the time to begin the boarding process. It's usually a two-person task, so you can ask for help from friends or family members if needed. You could also hire a person to do the work. This is an ideal option for those with big homes or are unable to move around.
After measuring each window opening and using a saw, cut the plywood sheets into the proper dimension. It's important to use a high-quality tool for this job because you want the cuts to be precise and straight. You should also drill pilot holes into the plywood and into the wall's framing, prior to installing them. This will stop the wood from splitting.
Set up a plywood sheet on top of each window and align it. To ensure a perfect fit, make sure the plywood sheet extends beyond all windows on all sides. Drill a series of pilot holes through the plywood and the framing, spacing them approximately 16 inches apart. This will ensure that screws don't penetrate too deeply into the plywood and weaken it.
You should also put a washer of metal over each screw to prevent it from sinking too far into the plywood and causing damage to it. Use screws that are wide and long enough to reach every window sill. This will help to keep the wood in place during a storm and stop water leakage.
Break-ins
Following a burglary, the first thing to do is to secure any windows or doors that have been damaged. This prevents any unauthorized access to the property as well as protects the contents of the business or home from further damage. It also conveys to potential criminals that the property is uninhabited and may even stop them from returning for future crimes.
The boarded-up windows can help protect your home from potential buyers. The idea of boarding up all windows might not be the best option because it could send a message to criminals about your desperate need for money or property. A prospective buyer may also find it difficult to imagine their life in a home which is surrounded by plywood.
Installing security bars around the frames of your windows is another way to protect your home. Although they are a good security measure against burglars, the bars can be dislodged or broken by objects that are thrown at them. Installing security glass made of polycarbonate is a permanent solution to burglary. Polycarbonate is 250 times more durable than glass and is designed to bend under pressure, so thieves aren't able to smash it into the frame.
By boarding up your windows and doors, you can not only deter burglaries, but will also shield your building against further damage. Rain, hail and snow can flood your building's interior and cause damage to fixtures and furniture. Boarding up windows and doors will reduce the risk that employees or customers could be injured by falling glass.
Contact Valor Taskers if you need assistance with boarding up your business or home following a break-in. Our Taskers are equipped with the tools and materials to secure your damaged property quickly. They can also take care of any other repair or cleaning tasks that you may require following a disaster.
Damage caused by weather
Extreme weather can cause severe destruction to businesses and homes. Natural disasters, such as a hurricane or tornado can wreck havoc on communities across the nation. If your property has been damaged as a result of a devastating storm, the best way to protect your building and prevent further damage is to invest in emergency boarders.
Window boarding is a type of service in my area that utilizes plywood boards to fix damaged windows and doors. This reduces further damage. The cost of this service depends on the size and number of windows that are covered, and also the location of your property. The cost of the materials for boarding also plays an important part in the final cost of the project.
Window Boarding Up: Benefits and Uses
Emergency boarding is vital for protecting homes after a disaster and deterring crime. It deters intruders and prevents further damage to the property until repairs are completed. In addition, boarding up can help to maintain insurance eligibility. Many insurance companies require that the property be secured immediately after an incident to ensure insurance coverage.
A professionally installed tarp and boarding service can safeguard personal belongings and assets for businesses. These are because items exposed to the weather can deteriorate, and end up posing a fire risk. Boarding up helps keep valuables secure until they are repaired or replaced.
A tarp or a boarding can also help stabilize a structure that is unstable, making it more safe for contractors and inspectors who are working on repairs. The boards prevent further damage to a building and reduce the risk of injury for residents and pedestrians who pass by. Boarded-up windows are also a safety measure, since broken glasses can pose danger to pets and children.